Face Fit Testing requirement for use of RPE

an employer, is required by law to protect employees, and others, from harm.

To meet this requirement, employers will need to complete a risk assessment to assess the risks posed by your work practices and implement identified control measures.

Where the risk assessment identified the need for tight-fitting RPE  to protect against the inhalation of hazardous substances in workplace air, it is the employer’s responsibility to ensure that the RPE will protect the wearer.

The Approved Code of Practice for the Control of substances hazardous to health regulations 2002 requires that tight fitting RPE should be face fit tested by a competent individual as part of the selection process and to ensure there is an adequate seal between the selected RPE and the wearer’s face.  

Face fit testing is important because if the RPE doesn’t fit correctly, the protection provided to the wearer will be greatly reduced and may lead to ill health or even put the RPE wearer’s life in danger.

When conducting a face fit test, and where tight-fighting RPE is used, to achieve a good seal between the tight-fitting respirator and the wearer’s face, the wearer will need to be clean shaven Face fit tests should not be conducted if there is any hair growth between the wearers skin and face-piece sealing surface, this includes, stubble beard growth, beard, moustache, sideburns, or a low hairline. If the respirator has an exhalation valve, hair within the sealed mask area should not impinge upon or contact the valve.

Being clean-shaven when wearing tight-fitting RPE prevents inward leakage of contaminated air from around the edges of the face seal being breathed into the lungs. It is also very important that the RPE is put on correctly and checked for a good fit every time it is put on.

All employers should note that under health and safety law, employers cannot require workers to be clean shaven; this is because alternative RPE to tight fitting respirators are available and can be used instead.

If you, as an employer, require further help or advice and/or face testing to be undertaken contact us: Email ohteam@hawkeshealth.com OR phone us 0800 193 6222

More Posts

New Offshore Weight Limits: What UK Employers Need to Know

The offshore energy sector faces a significant shift. From November 2026, anyone working offshore must weigh under 124kg (19st 7lb) clothed – no exceptions.Why? Simple physics. Helicopter winch systems have absolute limits when evacuating casualties. Add rescuer plus casualty weight

Workplace Noise Reports: Are UK Employers Getting What They Pay For?

We’re pleased to share findings from research conducted by Agnieszka Pietrzak, now working at Oxford University, who investigated the quality of workplace noise survey reports that employers are commissioning across the UK. Her findings have revealed surprising insights that may impact